BNYJH - 27 149 ALKYD WALL PRIMER
- MSDS: BNYJH
- Manufacturer: VALSPAR CORP
- Product Name: 27 149 ALKYD WALL PRIMER
- National Stock Number: 8010-00F024748
Product Identification
Product ID:27 149 ALKYD WALL PRIMER
MSDS Date:01/13/1989
FSC:8010
NIIN:00F024748
MSDS Number: BNYJH
Responsible Party
MINNEAPOLIS, MN 55413-1211
US
Emergency Phone: (800) 228-5635
Info Phone: (612) 332-7371
Cage: 06758
Contractor
Telephone: 612-332-7371/888-345-5732
Cage: 23526
Ingredients
KEROSENE (PETROLEUM), HYDROTREATED; PETROLEUM DISTILLATE,
CAS: 64742-47-8
RTECS: OA5504000
Fraction By Weight: 10-20%
OSHA PEL 100 PPM
ACGIH TLV: 100 PPM
CLAY (KAOLIN)
CAS: 1332-58-7
RTECS: GF1670500
Fraction By Weight: 10-13%
OSHA PEL 15 MG/M3 TDUST
ACGIH TLV: 2 MG/M3 TDUST; 9293
DIATOMACEOUS EARTH, FLUX-CALCINED, NATURAL, SILICA
CAS: 68855-54-9
Fraction By Weight: 5%
OSHA PEL 6 MG/CUM
ACGIH TLV: 0.10 MG/CUM
TITANIUM DIOXIDE, TITANIUM(IV) OXIDE, TIO2
CAS: 13463-67-7
RTECS: XR2275000
Fraction By Weight: 10%
OSHA PEL 15 MG/M3 TDUST
ACGIH TLV: 10 MG/M3 TDUST; 9293
PHTHALIC ANHYDRIDE-PENTAERYTHRITOL-SOYBEAN OIL POLYMER
CAS: 66070-60-8
Fraction By Weight: 5%
FATTY ACIDS, TAL-OIL, POLYMER W/GLYCEROL, PENTAERYTHRITO &
CAS: 66070-62-0
Fraction By Weight: 20-30%
CALCIUM CARBONATE, DOMOLITE, LIMESTONE, WHITING
CAS: 1317-65-3
RTECS: EV9580000
Fraction By Weight: 40%
OSHA PEL 15 MG/CUM (DUST)
ACGIH TLV: 10 MG/CUM (DUST)
3.46 LBS/GAL OR 414 GM/LT (THEORETICAL)
RTECS: 9999999VO
Hazards
Routes of Entry: Inhalation:YES Skin:NO Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:EYES/SKIN: IRRITATION. INHALATION:
PERMANENT BRAIN/NERVOUS SYSTEM DAMAGE, RESPIRATORY/THROAT/NOSE
IRRITATION, DIZZINESSS, HEADACHE, NAUSEA, LUNG INJURY, SILICOSIS &
CANCER.
Explanation of Carcinogenicity:NONE
Effects of Overexposure:EYES/SKIN: IRRITATION. INHALATION: PERMANENT
BRAIN/NERVOUS SYSTEM DAMAGE, RESPIRATORY/THROAT/NOSE IRRITATION,
DIZZINESS, HEADACHE, NAUSEA, LUNG INJURY, SILICOSIS & CANCER.
Medical Cond Aggravated by Exposure:RESPIRATORY OR SKIN CONDITIONS
First Aid
First Aid:EYES: FLUSH W/PLENTY OF WATER FOR AT LEAST 15 MINS. SKIN:
WASH THOROUGHLY W/SOAP & WATER. INHALATION: REMOVE TO FRESH AIR.
INGESTION: INDUCE VOMITING. NEVER GIVE ANYTHINGG BY MOUTH TO AN
UNCONSCIOUS P ERSON. OBTAIN MEDICAL ATTENTION IN ALL CASES.
Fire Fighting
Flash Point Method:TCC
Flash Point:103F
Lower Limits:1%
Upper Limits:21%
Extinguishing Media:CO2, DRY CHEMICAL, FOAM & WATER FOG
Fire Fighting Procedures:SELF-CONTAINED BREATHING APPARATUS OR AIR
MASKS. KEEP FIRE EXPOSED CONTAINERS COOL W/WATER SPRAY.
Unusual Fire/Explosion Hazard:CONTAMINATED RAGS, WIPES, SAWDUST, ETC.
MAY CATCH FIRE SPONTANEOUSLY.
Accidental Release
Spill Release Procedures:VENTILATE AREA. USE SELF-CONTAINED BREATHING
APPARATUS OR AIRMASK FOR LARGE SPILLS IN A CONFINED AREA.
Handling
Handling and Storage Precautions:AVOID CONTACT W/EYES & BREATHING OF
VAPORS. ELIMINATE IGNITION SOURCES. KEEP CONTAINER CLOSED WHEN NOT
IN USE. STORE <120F.
Other Precautions:EMPTY CONTAINERS MAY CONTAIN PRODUCT RESIDUE,
FLAMMABLE & EXPLOSIVE VAPORS. DON'T CUT PUNCTURE OR WELD ON/OR NEAR
CONTAINER. OBSERVE ALL LABEL WARNINGS UNTIL CONTAINER HAS BEEN
CLEANED OR RECONDITIONE D.
Exposure Controls
Respiratory Protection:WEAR PROPERLY FITTED RESPIRATOR NIOSH/MSHA
APPROVED DURING & AFTER APPLICATION UNLESS AIR MONITORING
VAPOR/MIST LEVELS ARE BELOW APPLICABLE LIMITS. FOLLOW RESPIRATOR
MFG DIRECTIONS FOR RESPIRATOR USE.
Ventilation:REQUIRED FOR SPRAYING OR IN A CONFINED AREA. VENTILATION
EQUIPMENT SHOULD BE EXPLOSION PROOF.
Protective Gloves:RECOMMENDED
Eye Protection:RECOMMENDED
Other Protective Equipment:CLOTHING FOR PAINTING OPERATIONS
Work Hygienic Practices:REMOVE/LAUNDER CONTAMINATED CLOTHING & SHOES.
THOROUGHLY CLEAN CONTAMINATED SHOES.
Supplemental Safety and Health
INTENTIONAL MISUSE BY DELIBERATELY CONCENTRATING & INHALING CONTENTS
MAY BE HARMFUL OR FATAL.
Chemical Properties
Boiling Pt:B.P. Text:315F
Vapor Pres:2
Vapor Density:5.1
Spec Gravity:1.31
Evaporation Rate & Reference:(BU AC = 1): 0.1
Solubility in Water:INSOLUBLE
Appearance and Odor:NORMAL FOR A COATING PRODUCT
Percent Volatiles by Volume:54.38%
Stability
Stability Indicator/Materials to Avoid:YES
Stability Condition to Avoid:TEMPS >120F
Hazardous Decomposition Products:SILICON DIOXIDE, CO, CO2 & METAL
OXIDES
Disposal
Waste Disposal Methods:DISPOSE OF IN ACCORDANCE W/LOCAL, STATE, &
FEDERAL REGULATIONS. DON'T INCINERATE CLOSED CONTAINERS. STORE
WASTE UNDER WATER IN CLOSED METAL CONTAINERS UNTIL DISPOSED.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.